Petzl SEQUOIA SWING User Manual download pdf (Page 4)

C69SFA SEQUOIA SWING C695050D (080610)

Harness preparation and pre-adjustment

Clic!

MAX

5B. Adjust the height of the

attachment bridge (position

of the gated rings)

You can adjust the height of the

attachment bridge according to your

body morphology and your speciﬁ c

usage (3positions possible). This

adjustment allows you to be closer

to or further from the attachment

bridge. See drawing.

GATED RINGS

- Open the gated rings by unscrewing the screw with the n°25 male Torx driver supplied

with the product.

- Close the ring and don’t forget the spacer.

- It is absolutely necessary to put a drop of thread-lock

on the screw.

- Tighten the screw until the red indicator is no longer

visible; continue tightening to a torque of 3Nm.

Verify that the threestraps are correctly positioned in the

gated rings (straps should not be twisted or intertwined).

WARNING, do not use the SEQUOIASWING without the

ATTACHMENTBRIDGE.

- Reposition the straps.

Slide the two seat width adjustment extensions and verify the rapid adjustment system

is securely engaged in the holes (see drawings). The extensions must be locked.

Do not exceed the maximum value indicated on the underside of the seat.

Do a suspension test to verify comfort. The straps(9) should not be too tight;

if they are, increase the seat width.

3,0 Nm

thread-lock

1 2 3 4 5 6 7 8 9 ... 25 26

No comments

Petzl SEQUOIA SWING User Manual Page 4